Cisco N3K-C3132Q-40GE Nexus 3132Q, 32x QSFP+ 40G+ 4x SFP 1RU switch

Cisco N3K-C3132Q-40GE Nexus 3132Q, 32x QSFP+ 40G+ 4x SFP 1RU switch

36,000,000VND

Danh mục: Cisco N3K, Switch, Switch Cisco, Thiết Bị Mạng Từ khóa: 1RU, 3132Q, 4 SFP, 40G ports, Cisco, N3K, N3K-C3132Q-40GE, Nexus, Switch

Mô tả

Thông số kỹ thuật :

Description	Specification
Physical	– 1RU fixed form-factor switch – 32 QSFP+ ports; each supports native 40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes – 4 SFP+ ports – 2 redundant power supplies – 4 redundant (3+1) fans – Management, console, and USB flash-memory ports
Performance	– 2.5-Tbps switching capacity – Forwarding rate up to 1.4 bpps – Line-rate traffic throughput (both Layer 2 and 3) on all ports – Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames)
Hardware tables and scalability^*	Number of MAC addresses	288,000
	Number of VLANS	4096
	Number of spanning-tree instances	– RSTP: 512 – MSTP: 64
	Number of ACL entries	– 4000 ingress – 1000 egress
	Routing table	– 16,000 prefixes and 16,000 host entries^* – 8000 multicast routes^*
	Number of EtherChannels	64 (with vPC)
	Number of ports per EtherChannel	16
	System memory	4 GB
	Buffer size	12 MB shared
	Log Flash	2GB
	Boot-flash memory	4 GB
Power	Frequency	50 to 60 Hz
	Power supply types	– AC (forward and reversed airflow) – DC (forward and reversed airflow)
	Typical operating power	210W
	Maximum power	340W
	AC PSUs – Input voltage – Frequency – Efficiency	– 100 to 240 VAC – 50 to 60 Hz – 89 to 91% at 220V
	DC PSUs – Input voltage – Maximum current (PSU output – System input) – Efficiency	– –40 to –-72 VDC – 33A (400W unit) – 85 to 88%
	Power-supply efficiency	89 to 91% at 220V
	Typical heat dissipation	– 3132Q: 717 BTU/hr
	Maximum heat dissipation	– 3132Q: 1160 BTU/hr
Cooling	– Forward and reversed airflow schemes ◦ Forward airflow: Port-side exhaust (air enters through fan tray and power supplies and exits through ports); supported with AC and DC power supplies ◦ Reversed airflow: Port-side intake (air enters through ports and exits through fan tray and power supplies); supported with AC power supply only – Redundant fans – Hot swappable (must swap within 1 minute)
Sound	Measured sound power (maximum) – Fan speed: 40% duty cycle – Fan speed: 70% duty cycle – Fan speed: 100% duty cycle	– 66.1 dBA – 70.6 dBA – 76.9 dBA
Environment	Dimensions (height x width x depth)	1.72 x 17.3 x 19.7 in. (4.4 x 43.9 x 50.5 cm)
	Weight	21.5 lb (9.3 kg)
	Operating temperature	32 to 104°F (0 to 40°C)
	Storage temperature	–40 to 158°F (–40 to 70°C)
	Operating relative humidity	– 10 to 85% noncondensing – Up to 5 days at maximum (85%) humidity – Recommend ASHRAE data center environment
	Storage relative humidity	5 to 95% noncondensing
	Altitude	0 to 10,000 ft (0 to 3000m)

Các loại module quang Cisco sử dụng cho switch cisco N3K-C3132Q-40GE:

Part Number	Description
QSFP-100G-AOC (1m-30m)	QSFP 100-Gbps to QSFP 100-Gbps AOC: 1, 2, 3, 5, 7, 10, 15, 20, 25, and 30m
QSFP-100G-CU (1m-5m)	QSFP 100-Gbps to QSFP 100-Gbps copper DAC: 1, 2, 3, and 5m
QSFP-4SFP25G-CU (1m-5m)	QSFP 100-Gbps to 4 x SFP 25-Gbps passive copper breakout cable: 1, 2, 3, and 5m
QSFP-100G-SR4-S	100GBASE SR4 transceiver module with MPO-12 connector, multimode fiber up to 100m
QSFP-100G-LR4-S	100GBASE LR4 transceiver module for single-mode fiber (SMF) with LC connector, 10km
QSFP-100G-CWDM4-S	100GBASE CWDM4 transceiver module for single-mode fiber (SMF) with LC connector, 2km
QSFP-100G-PSM4-S	100GBASE PSM4 transceiver module with MPO-12 connector, single-mode fiber up to 500m

Các loại nguồn sử dụng cho switch cisco N3K-C3132Q-40GE:

N2200-PAC-400W	N2K/3K 400W AC Power Supply, Forward airflow (port side exhaust)
N2200-PAC-400W-B	N2K/3K 400W AC Power Supply, Reversed airflow (port side intake)
N2200-PDC-400W	N2K/3K 400W DC Power Supply, Forward airflow (port side exhaust)
N3K-PDC-350W-B	N3K Series 350W DC Power Supply, Reversed airflow (port side intake)